Product ID:CURING AGENT 1032
MSDS Date:01/01/1987
FSC:8040
NIIN:00F003890
MSDS Number: BBNZR

Emergency Phone: (404) 451-2777

Cage: 22121

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

NON-HAZARDOUS

Effects of Overexposure:INHALATION: VAPORS ARE IRRITATING/MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT.

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH W/SOAP & WATER.
LAUNDER CLOTHING PRIOR TO RE-USE. EYES: FLUSH W/WATER FOR 15
MINUTES. GET MED ATT. INHALATION: REMOVE VICTIM TO FRESH AIR.
ADMINISTER OXYGEN. I NGESTION: DON'T INDUCE VOMITING. GIVE WATER.

Flash Point:>200F (PMCC)
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:IN CONFINED AREAS NIOSH APPROVED SCBA. WATER
COOL CONTAINERS
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:AVOID CONTACT WITH LIQUID AND VAPORS. WIPE
WITH A CLOTH OR COLLECT ON ABSORBENT MATEAL. LARGE SPILLS: DIKE AND
CONTAIN. PUMP OR SHOVEL INTO SALVAGE VESSELS.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINERS. AVOID CONTACT W/SKIN & EYES. USE W/ADEATE
VENTILATION. USE GOOD HYGIENE PRACTICES.
Other Precautions:RCRA STATUS: NOT CONSIDERED TO BE A HAZARDOUS WASTE.

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS
Ventilation:LOCAL EXHAUST AND MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS. EYE-WASH
STATION/SAFETY SHOWER.
Supplemental Safety and Health
MSDS DATED: 13 JUNE 1986. USES 300-1 EPOXY RESIN 8040-00-F00-3883

Boiling Pt:B.P. Text:>225F
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.0
Evaporation Rate & Reference:(BU AC = 1) <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
MINERAL OR ORGANIC ACIDS, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.

Waste Disposal Methods:CURE WITH EPOXY RESIN, THEN BURY OR INCINERATE
WHERE PERMITTED BY FEDERAL, STATE AND LOCAL REGULATIONS. REMOVE
SALVAGE VESSELS TO A WASTE DISPOSAL SITE OPERATING IN COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.